Andrew-

Look at my above post.. You came to some of the same conclusions in your testing, and that is that some of the ACC shafts perform quite well for a variety of setups, as does the 2314. Obviously you have one of those configurations.

After you get your groups tuned to as tight as you can get them at distance, just for grins run each setup through paper at 6-9' and I'll bet you find a 11:00 tail-high left tear approx 1/4-1/2" or so if your spine is correct. I am confident some will tear this way if you are a right-handed shooter and use a release. Good shooting, Pinwheel 12