W460--
You just got the Max 2000, not the SN my friend! (The SN is not available in a rapid cam, that's how I know, plus, you just received it from me!) <img src=icon_smile_big.gif border=0 align=middle>
The centershot will be roughly between 5/8" and 3/4" usually, measured from the face of the shelf on the flat near the rest holes to the middle of your rest. This will get you close. Line your arrow up so it will run right across the rest holes, and install you loop accordingly. I initially set my nocking point approx. 1/16" above center, and tune from there.
These rough settings should get you on paper, then you can fine-tune to your individual setup from there. Good luck, enjoy your new bow!<img src=icon_smile_wink.gif border=0 align=middle> Pinwheel 12