Dang, I guess I need some pictures to do this right...sorry I'm not explaining it well enough. Take the string out of the equation and you should be left with two cables. Those are what I'm calling the forward cables, probably a better name is down buss cable bla bla bla. Anyway, push one of these cables forward until the roll pin hole in cam is just below top limb and install roll pin. Should only have to push cable forward 2-3 inches. The roll pin hole in cam lives between the limbs. Disconnect the "easy" side of cable, not the side that is all wound around the cam. Do the same for the other cam and your done. Does that help?