ORIGINAL: gibblet
now, no one in their right mind took the warranty issue as transferable. someone was only picking at her to start trouble. she clarified.
the limb issue is with the different grades of gordon glass and the process used to make the limb - not that it was gordon glass. that is plainly stated in the thread.
these are some of the points you're making that aren't really from the information given.
and, for what its worth:
kevin did not design any of the binary cam bows. he didn't design the risers, the cams, or anything. so yes, he could steal them since they aren't his.
Gibblet this was taken from the thread.
http://www.archerytalk.com/vb/showth...24&page=13 post # 520 I dont know if he desinged them or not but he says he did. Dont really care just lookin forward to the new bows.
I designed the 06 Binary cams and mods in late april early may, made the first ones in May in louisiana, was there for a week machining them, made a few modifications to the mods as late as sept. this was for draw length and moving the anti lockup post.
I have designed every riser and cam ever sold by Bowtech, including the 06 line of Bowtechs, if this was not true that would be grounds for a lawsuit from Bowtech.
I also never said that every Bowtech bow would break, I said there is a limb problem, when some companies are touting their warranty is 2% or less and certain companies are much higher there is a problem, whether with the material, manufacturing process or pre-stress.
I have always designed all the risers and cams, and have all my original dxf's to prove it, the origination date is always saved in the file, as well as every time you modify the drawing.