This was my attempt at shooting new targets with a .54 caliber Renegade and some different size ball-ets. I started out with the 336 grain HP ball-et and since I had never shot them, loaded 70 grains of Swiss 3f black powder. I circled the hits on the yellow target in green. They were all over the place. I then changed to Pyrodex RS and upped the charge to 90 grains of powder and the 336 grain ball-ets behaved much better. I should point out that I did not swab the barrel while shooting the group.

I then swabbed the barrel and changed the target. I also went to the 310 grain RN ball-et. Again, since 90 grains of Pyrodex worked so well I stuck with it. I fired a three shot group that clover leafed. I then adjusted my POI to see if I could hit the bulls eye. After that I decided to see just how fast I could load and shoot the ball-et so I fired off I belief eight more. On the last one the loading was becoming hard, so I stopped. I really was happy with the accuracy of the 310 grain ball-ets.

Sabotloader was the one who presented me with the blue target and of course SharpShooter was responsible for the yellow target. Thanks guys. I print them on card stock paper and they work excellent....