Matthew,

On the 2006 Constitution the cams should be set with the bottom edge of the
tooling holes even with the edge of the limbs. This is just a quick
reference point and the let off will need to be checked to see if any
adjustments need to be made.

If you've backed the limbs out 2 1/2 turns you may need to move the stop
towards the short end to reduce the valley a little which will give you less
let off.

Both cams don't need to bet set exactly the same and in many cases they
aren't. They'll tune fine this way.

If you have any more questions, please feel free to ask them.

Regards,

Pat Dinan
Technical Support
BowTech & Diamond Archery

[/align]