Getting rid of cam lean. I noticed that changing the twist in the cables could make the lean better/worst. I got the perfect combination, which made the lean very little. Then I switched the top and bottom limbs. This put the weak side of the limb that allowed the cam lean onto the opposite side. This made the weak side of that limb mean nothing, because the cam can only lean one way. I have gotten rid of all of my cam lean

As for the split yokes, I'm didn't mean to put the yokes onto the limbs. If they made the limbs wider and put another cable slot, they could split the cable and have two post. They would still attach to the cam, but on both sides instead of one.