HuntingNet.com Forums - View Single Post - black mag 3
Thread: black mag 3
View Single Post
Old 11-02-2005 | 10:10 AM
  #7  
Buckeye Mike
Fork Horn
 
Joined: Feb 2003
Posts: 225
Likes: 0
From: Columbus Ohio USA
Default RE: black mag 3

The range results I was reporting were for 250 Shockwaves. I was very surprised about how easy they were to load because I hadfound everything but Powerbelts to be a challenge. After the first shot they were tight for the first six inches or so but after that they went down fine. Also, I was using the new "clean bore" primers for the first time.

ORIGINAL: MLKeith

Buckeye Mike: What bullet are You using in the Omega. I can only load that many shots even with Black Mag'3 if I use Powerbelts. Any of the sabot/bullet combinations are so tight in my Omega I can load two or three and then they are impossible to get down the barrel. I know my barrel seems to be the most difficult of any Omega I have heard about. It is a stainless and I have run 200 plus passes with JB bore paste and even after that it still makes loading difficult. Harvester sabots are the only ones that work and then only if I select .451 bullets not .452. I slugged the bore and it is a perfect .500 but the groves are very shallow.
Buckeye Mike is offline  
Reply