ORIGINAL: flcracker
guys, i bought used a while ago a stainless mk85. i retrofitted it with a 209 primer kit and never really thought about it till now...when cleaning the thing, i have to drop the stock to access the trigger group, then i have to take the trigger off , then unscrew the bolt assembly so i can finally get to the breech plug.
You do have to remove the barrel and unscrew and remove the bolt assembly but you don't have to remove the trigger.Once the bolt assembley is removed, you drop the breech plug wrench in and unscrew the breech plug and remove it. If the wrench or breech plug hang up a bit when you try to insert them or remove them, simply make sure the safety is off and hold in on the trigger.