I got mine tuned last week. I am pulling 71 lbs @ 29". For hunting I am shooting a 28 1/2" Gold Tip XT 75/95 with 125 grain points, and 4" vanes on top of a wrap on the back end. First get your centershot right, this should be the easy part if your are relatively close to the correct spine. Then, making sure your rest is level with the plunger hole, setup your nock point 1/8" high. If you need to make adjustments to the nock height, move the nock not the rest. The rest should always be at the same height as the plunger hole.

I always make sure the bottom limb has an extra 1/4 turn of limb bolt when compared to the top as well. It shoots bullet holes in paper this way and groups my Slick Trick 125's at about 4" at 50 when mixed in with my field pointswhen Iam doing my part.