ORIGINAL: MASTERDIVER
TerryM,
Speaking of doing it yourself
I want to change my poundage from 62# TO 65#. I have the allen wrenches to do it but don't want to mess up my bow. Which way do I turn my screws and is there a particular order to do it in? Quarter/half or full turn?
Thanks
Most bows increase draw weight by 3-4 pounds with one complete turn of both bolts. Tighten the top bolt 1/2 turn, then the bottom and repeat. You should be good then. Make sure you turn both bolts an equal amount. If you have a Bowtech, make sure you loosen the locking bolts on the side of the riser and re-tighten them when you are done.