I have been trying to sight in my Kodiak with powerbelts. I got the rfle scope combo through Cabelas. I had a good group at 50and moved out to 100 yards. I was working the shots up to the bull and then the pattern went to hell. I was centered on the target but low. I would adjust the scope up and the shot moved up. I jumped the adjustment up 2" and over 1/2" and the shot junped up six abd over 3. Backed back to the right 1/4" and the shot jumped 3" to the right. I shot a couple of more to try to group, and the shots were all high and very scattered. I was either very lucky with the shots that seemed to move properly as I adjusted the scope, or......? Is it just that the power belts are inconsistant. I had trouble at 50 then they grouped well, then seemed to be doing well at 100 and then back to all over, or could it be the Pine Ridge scope. I wouldn't think that 30 rounds would be enough to damage the scopes ability to hold it's adjustment. Any thoughts from you experienced MLers? These are the first 30 shots Ihave ever taken with an inline and scope. I thought I might try some saboted bullets and see if they shoot more consistantly.