I tried fletching 3 arrows tonight that I sprayed last night. I did have a couple of issues that are not related to the cresting at all. I'm having trouble getting my blazers to make good contact with the shaft of my arrows...especially through the middle. Two of the arrows did not come out because of this. I did manage to successfully fletch 4 blazers to one of theGold Tip XT 75-95's. The one thing I did notice when Iattached the blazers to the arrow was thatthe glue ate (melted) right through the laquer. I don't know if I put too much laquer on or if I used too much glue or even the wrong type of glue for this process (Bohning Fletchtite Platinum) but this did concern me a little. The four fletchings do seem to be secured tightly to the shaft and do not come off when pulled.I haven't tried to pull really hard yet....I'llgive them until tomorrowbefore I try that. If they hold up through the pull test, I plan to shoot them a couple dozen times through the whisker biscuit and then see how they are holding up. Now if I could only get this fletch contact issue solved.....