No, actually you would not. I don't remember all of the specific about it, but I know that your arrows will be longer than your draw length. I think draw length is measured from 1 1/2 inches behind the plunger hole (the hole for the rest) to the ancore point on the string. This part may not be right.Anyways if you were to cut an arrow to thislength, then your arrow would go past the rest and fall off. You will need an arrow longer than that so it won't fall off. How much longer, I do not know. Like I said I'm not sure on the specifics, but I know your arrows will need to be longer than your draw length. I'm sure someone on here can give you more specifics than this. Hope I helped out, even just a little bit.