For those interested ,I finally had a chance to go to the range this morning and test my rifle. Ended up placing two pieces of 0.008” shim stock between the back of the base and receiver to solved the problem. Now I have lots of adjustment with my scope and was able to sight it in at 100 yards. Now to start reloading and start testing loads.

There was nothing wrong with my original set up and I also found nothing wrong with the rings and base. I guess it has something to do with the receiver and barrel. Something must be out of line. Hopefully I have solved the problem with out having to bring it in to the gunsmith. I’m not sure if gunsmith could do anything but it would be under warranty. I’ll leave it as is. Thanks again to all those who replied and tried to help me in solving my problem....