Len, I was thinking about a machined-in boss inboard of each limb pockets (to not interfere with a bow press) and using dual carbon rods with aluminum fittings for attaching the Limb Savers to. The adjustment could be done at the string ends of the rods with the threaded aluminum Limb Saver "bases" and set screws. The carbon rods could be glued and set screwed into the riser bases for a secure mount. I'm thinking that there would be less stress on each with two rods taking the pounding and mounting them closer to the cams, the speed of the string would be less than at the nock area and result in longer wear. The carbon rods might also have rubber silencers on them like what BowTech puts on their guide rods