Do any of you do European mounts?
#1
Thread Starter
Join Date: Dec 2003
Location: Georgia
Posts: 24
Do any of you do European mounts?
I noticed the post below concerning plaques...I had a shoulder mount done of my first big buck, but have since done Euro. mounts exclusively. I know it's all opinion, but they just look better to me, and I can easily do them myself.
Just curious if I'm all alone.....
Just curious if I'm all alone.....
#2
Nontypical Buck
Join Date: Feb 2003
Location: Rifle, Colorado
Posts: 2,012
RE: Do any of you do European mounts?
Your not alone, I really like them too. I Euro'ed my last antelope and love it, as I have the last few deer. But the next bruiser I get will probably be a normal mount
#3
Join Date: Nov 2003
Location:
Posts: 326
RE: Do any of you do European mounts?
i have 3 euro mounts ,all 8 pointers . i had them done 1 they cost less and 2 they take up less room . the big 8 i shot this year im having a shoulder mount done . i would say i like both equally.
#4
Join Date: Nov 2003
Location:
Posts: 326
RE: Do any of you do European mounts?
i have 3 euro mounts , i had them done because they take up less room and i have been told by the powers that be that i already have to many.the big 8 i shot this year im having a shoulder mount done on it.
#5
Fork Horn
Join Date: Feb 2003
Location: Athabasca Alberta Canada
Posts: 353
RE: Do any of you do European mounts?
I have 3 euros done by myself.
But i do mine a little diffrent. I remove the nose plate you know the skinny flat one. Then I fill the nose cavity with poly fill. as well I fill in all the sinus cavities and any bone plate joints to make it all smooth. then depending on the look I want, I paint them with either flat or gloss white. I have a few pic's if anyone is interested.
But i do mine a little diffrent. I remove the nose plate you know the skinny flat one. Then I fill the nose cavity with poly fill. as well I fill in all the sinus cavities and any bone plate joints to make it all smooth. then depending on the look I want, I paint them with either flat or gloss white. I have a few pic's if anyone is interested.
#6
Join Date: Feb 2003
Location: Sheridan Arkansas
Posts: 701
RE: Do any of you do European mounts?
i did my first euro mount a couple of weeks ago. it was easy and it turned out great. I'm not finished yet, but i got 2 weeks out of school so i'll be gettin it finished sometime soon and i'll post some pics. the antlers are still chromed out...i never took the foil off. I'm debatin whether or not to leave 'em that way
#8
Join Date: Feb 2003
Location: Sheridan Arkansas
Posts: 701
RE: Do any of you do European mounts?
when i did mine, i used these instructions:
http://www.southernvisuals.com/LeBou...kull_mount.htm
http://www.southernvisuals.com/LeBou...kull_mount.htm
#9
RE: Do any of you do European mounts?
I like euro's for a change rather than the cut skull mount on deer that just aren't shoulder mount material. I certainily wouldn't say I like them better than a shoulder mount but a good, cheaper alternative for sure.
takem, the euro mounts is a bit intensive but can easily be done as DIY project. You need to flesh out the skull first(this is remove the cape from the animals skull, do so with a knife and I find a flat head screw driver works well to pry the cape from the pedicle sites around the antlers. Once you have exposed the skull you snap the lower jaw off, I just place the lower jaw on the floor in my garage and push, it will snap back then you just twist or cut the connective tissue. I do the same with the neck socket. I then remove excess meat, eye sockets, roof of the mouth and cartlidge in the nose(a pair od needle nose pliers work well, just push and pull until the cartlidge is mostly gone). I take a 6" spike (but and arrow shaft works) to mush up the brain via the brain stem...don't worry if you don't get it all out yet! Then the cook phase, place on the bbq or camp stove a large pot with enough water to submerge the entire skull, bring and keep at a gentle boil for about 4-6 hours(rap horns in alum. foil to prevent bleeching of the antlers). I suggest doing it outside and not in your good cooking pots. The meat, hide, brain will cook and fall off/out. Once this is done let it dry for a day and bleech the skull to get a bone white appearance. Ensure the horns don't get into a bleech/water solution or if you do the dry bleech/peroxiode paste stlye keep it off the antlers. It usually takes a few hours of boiling in bleech water solution or a day in the paste solution to get the white appearance. The paste way you just wash off it after a day with a garden hose or similar. Finally let it air dry for a week and your done.
Like I said a bit of effort but it is a nice reward when finished and you'll enjoy it for many years.
takem, the euro mounts is a bit intensive but can easily be done as DIY project. You need to flesh out the skull first(this is remove the cape from the animals skull, do so with a knife and I find a flat head screw driver works well to pry the cape from the pedicle sites around the antlers. Once you have exposed the skull you snap the lower jaw off, I just place the lower jaw on the floor in my garage and push, it will snap back then you just twist or cut the connective tissue. I do the same with the neck socket. I then remove excess meat, eye sockets, roof of the mouth and cartlidge in the nose(a pair od needle nose pliers work well, just push and pull until the cartlidge is mostly gone). I take a 6" spike (but and arrow shaft works) to mush up the brain via the brain stem...don't worry if you don't get it all out yet! Then the cook phase, place on the bbq or camp stove a large pot with enough water to submerge the entire skull, bring and keep at a gentle boil for about 4-6 hours(rap horns in alum. foil to prevent bleeching of the antlers). I suggest doing it outside and not in your good cooking pots. The meat, hide, brain will cook and fall off/out. Once this is done let it dry for a day and bleech the skull to get a bone white appearance. Ensure the horns don't get into a bleech/water solution or if you do the dry bleech/peroxiode paste stlye keep it off the antlers. It usually takes a few hours of boiling in bleech water solution or a day in the paste solution to get the white appearance. The paste way you just wash off it after a day with a garden hose or similar. Finally let it air dry for a week and your done.
Like I said a bit of effort but it is a nice reward when finished and you'll enjoy it for many years.
#10
Join Date: Sep 2003
Location:
Posts: 1,084
RE: Do any of you do European mounts?
I dont have anything other than my first deer on the wall, which i just horn mounted myself, but the euro mounts look cool and the regual shoulder mounts look cool as well, the euro mounts just change it up a bit and give it alittle more rustic look. imo