Make a spur necklace....
 

I have a few of these,its a fun way to share your experiences afield.Lot of ways to do this and its simple as could be heres.......
How to Make a Spur Necklace

Show off those long spurs by wearing them as a necklace or stringing them around your favorite wide-brimmed hat!

Directions:


Draw two guidelines across the turkey's leg on either side of the spur for the saw to follow. The lines mark a section of leg bone slightly wider than the spur.
Cut through the scale and bone. Hacksaws, jeweler's saws and band saws work well.
Peel the dried scale and skin from the bone. A sharp knife will trim the skin around the base of the spur. Make sure you don't cut the spur cap from the bone!
Clean the leg bone by scraping with a knife, sanding with sand paper and steel wool and polishing it with a buffing tool.
Note that the leg bone is hollow. You can string the spurs on heavy monofilament fishing line (15 to 30 lb. test line works best).
Beads may be added as spacers.
Tie off the line to finish or add a clasp or a barrel connector . You can find these fastening devices at hobby shops and jewelry supply stores. :)

RE: Make a spur necklace....
 

Bob , thats a great artical , thanks for sharing it...BT

[Deleted]
 

[Deleted by Admins]

RE: Make a spur necklace....
 

you gave me an idea! i am going to take two spurs and put a beard in between them and hang them on pegs on a stained board! thanks.

RE: Make a spur necklace....
 

Awsome idea! I'm going to have to start saving the spurs if i can get any that haven't broken them off yet!

RE: Make a spur necklace....
 

I done mine up like this.;)

RE: Make a spur necklace....
 

great display maytom!

RE: Make a spur necklace....
 

Loner..............Very nice!!!

RE: Make a spur necklace....
 

Here's some ideas.....









I hope this helps!

RE: Make a spur necklace....
 

wish i had saved my empty hulls.great idea,that is what i had in mind except for the hulls.