Choke question
#1
Spike
Thread Starter
Join Date: Jan 2015
Location: New York
Posts: 39
Choke question
I've been looking for turkey chokes for 20 gauge(Mossberg) and have found a choke with a constriction of 575", it says it can shoot lead shot and copper plated, but is it safe to shoot #5 through this choke?
Just wondering cause I don't want to hurt my gun or injure my self Lol.
Just wondering cause I don't want to hurt my gun or injure my self Lol.
#3
Nontypical Buck
Join Date: Jan 2008
Location:
Posts: 2,186
Ditto .... according to what you said is the manufacturer's info, any lead or copper coated lead should be good to go. #5's are a good choice for turkey. So is the 20 ga. Be sure to check a few different factory loads to see which patterns the best. Good luck !
#4
Giant Nontypical
Join Date: Jan 2011
Location: Allegan, MI
Posts: 8,019
.575 is a very tight constriction. Here is a quick synopsis on chokes and as you will see in the article they don't even mention one that tight. Many people think the tighter the choke the better the pattern, but that is not really true.
* A typical factory 12-gauge barrel measures about .724 inch. * Many popular turkey guns come with chokes with a .665 constriction, which shoots No. 5 or 6 lead shot extremely tight. * Super-tight turkey chokes — such as those with .660 constrictions — shoot small shot, such as No. 6, best. * Chokes with larger constrictions, such as .680, usually work best with larger shot — No. 4 or 5 — or in shotguns with back-bored barrels. * Hevi-shot produces the tightest patterns through chokes with constrictions of about .675. In testing, Hevi-shot fired through a special .675-constriction tube produced an average pattern density of 94 percent. Hevi-shot fired through a factory full choke (.691 constriction) produced an average pattern density of 88 percent in a 30-inch circle at 40 yards. * Hevi-shot fired through standard improved-cylinder chokes (.718 constriction) produced an average pattern density of 70 pecent, which is the industry standard for a “full” choke. When Hevi-shot is fired through chokes tighter than .665, pattern density begins to deteriorate.
* A typical factory 12-gauge barrel measures about .724 inch. * Many popular turkey guns come with chokes with a .665 constriction, which shoots No. 5 or 6 lead shot extremely tight. * Super-tight turkey chokes — such as those with .660 constrictions — shoot small shot, such as No. 6, best. * Chokes with larger constrictions, such as .680, usually work best with larger shot — No. 4 or 5 — or in shotguns with back-bored barrels. * Hevi-shot produces the tightest patterns through chokes with constrictions of about .675. In testing, Hevi-shot fired through a special .675-constriction tube produced an average pattern density of 94 percent. Hevi-shot fired through a factory full choke (.691 constriction) produced an average pattern density of 88 percent in a 30-inch circle at 40 yards. * Hevi-shot fired through standard improved-cylinder chokes (.718 constriction) produced an average pattern density of 70 pecent, which is the industry standard for a “full” choke. When Hevi-shot is fired through chokes tighter than .665, pattern density begins to deteriorate.
Last edited by Topgun 3006; 03-04-2015 at 11:32 AM.
#5
Spike
Thread Starter
Join Date: Jan 2015
Location: New York
Posts: 39
Thanks guys, I figured it would be ok,
Topgun 3006,
You know I am taking about a 20 ga not 12ga? 575" constriction choke would be equal or even looser than a 12 ga 660" constriction choke, and I don't mean equal in size cause the 12ga is lot bigger, but with the 20 ga shell being smaller and less shot would compare to a 12 ga shell and 660" choke, also I've heard a lot good things from the jellyhead for 12 gauge with standard #5 lead turkey loads. I'm going to go with the Remington nitro lead shot with the 20 ga, its lot less denser than other loads, and shouldn't deform its shape too much.
Topgun 3006,
You know I am taking about a 20 ga not 12ga? 575" constriction choke would be equal or even looser than a 12 ga 660" constriction choke, and I don't mean equal in size cause the 12ga is lot bigger, but with the 20 ga shell being smaller and less shot would compare to a 12 ga shell and 660" choke, also I've heard a lot good things from the jellyhead for 12 gauge with standard #5 lead turkey loads. I'm going to go with the Remington nitro lead shot with the 20 ga, its lot less denser than other loads, and shouldn't deform its shape too much.
#6
Giant Nontypical
Join Date: Jan 2011
Location: Allegan, MI
Posts: 8,019
Thanks guys, I figured it would be ok,
Topgun 3006,
You know I am taking about a 20 ga not 12ga? 575" constriction choke would be equal or even looser than a 12 ga 660" constriction choke, and I don't mean equal in size cause the 12ga is lot bigger, but with the 20 ga shell being smaller and less shot would compare to a 12 ga shell and 660" choke, also I've heard a lot good things from the jellyhead for 12 gauge with standard #5 lead turkey loads. I'm going to go with the Remington nitro lead shot with the 20 ga, its lot less denser than other loads, and shouldn't deform its shape too much.
Topgun 3006,
You know I am taking about a 20 ga not 12ga? 575" constriction choke would be equal or even looser than a 12 ga 660" constriction choke, and I don't mean equal in size cause the 12ga is lot bigger, but with the 20 ga shell being smaller and less shot would compare to a 12 ga shell and 660" choke, also I've heard a lot good things from the jellyhead for 12 gauge with standard #5 lead turkey loads. I'm going to go with the Remington nitro lead shot with the 20 ga, its lot less denser than other loads, and shouldn't deform its shape too much.
#7
Giant Nontypical
Join Date: Oct 2013
Posts: 9,230
I shoot most my turkeys with an plain jane Winchester pump that came with the WinChoke tubes. I'm not really fancy. I simply screw in the full choke tube and go shoot turkeys. So far it has tipped them over just fine. I have also used an old Browning A-5 with the factory full choke barrel. It has sent a couple flopping too.
#9
Nontypical Buck
Join Date: Feb 2003
Location: Pa
Posts: 4,647
Yea just screw in the choke and kill gobblers all day long every season lol
That Philosophy doesn't work when hunting weiry pressured gobblers!!!
NYlongbeards I'd take the time and fine what shoots the best in your gun that gives you a killing pattern out to 40 yards... "Some" Turkeys are hard to come buy and with gas prices the way they are I'll spend a little extra money to put the odds more in my favor
That Philosophy doesn't work when hunting weiry pressured gobblers!!!
NYlongbeards I'd take the time and fine what shoots the best in your gun that gives you a killing pattern out to 40 yards... "Some" Turkeys are hard to come buy and with gas prices the way they are I'll spend a little extra money to put the odds more in my favor
#10