It's been awhile, thought you might like to see what I've been up to.
11-20-2014, 03:00 AM
#11
Boone & Crockett
Join Date: Feb 2006
Location: Maine
Posts: 12,564
That one looks great as well.. By the way I forgot to mention welcome back..
This the only picture I have of the call at the time.. It is glass over slate.. The slate was lazer cut to eliminate any sanding of it..
This the only picture I have of the call at the time.. It is glass over slate.. The slate was lazer cut to eliminate any sanding of it..
Last edited by Phil from Maine; 11-20-2014 at 03:04 AM.
11-20-2014, 04:30 AM
#12
Nontypical Buck
Thread Starter
Join Date: Jun 2005
Location: Grain Valley, MO.
Posts: 3,030
Yep, that one is pretty common where builders use slate as the sound board, with glass as the surface.
They open up the back wall to access the soundboard. It works well, but in my opinion is not a true double sided call. You have less than 1/2 the surface area to play on than you do on the other side. Mine have 2 full size playing surfaces, with a dedicated soundboard to each surface. Only draw back is its thickness. It has to be thicker to allow for the 2 soundboards.
They open up the back wall to access the soundboard. It works well, but in my opinion is not a true double sided call. You have less than 1/2 the surface area to play on than you do on the other side. Mine have 2 full size playing surfaces, with a dedicated soundboard to each surface. Only draw back is its thickness. It has to be thicker to allow for the 2 soundboards.
01-07-2015, 04:07 PM
#14
Nontypical Buck
Thread Starter
Join Date: Jun 2005
Location: Grain Valley, MO.
Posts: 3,030
