mouth call for the fiance?
03-21-2013, 08:26 PM
#1
Fork Horn
Thread Starter
Join Date: Mar 2013
Location: Ny
Posts: 298
mouth call for the fiance?
Well she picked up a primos sonic dome tonite only to find out she has a narrow palate and it was way too big. Looking for some ideas on what yall think....point me in a direction! Was looking at a flextone babyface or quakerboy....
03-22-2013, 04:53 AM
#4
Nontypical Buck
Join Date: Jan 2013
Location: South Dakota
Posts: 1,035
Not sure if this applies to all calls, but when I trimmed down my HS Strut Raspy Ol' Hen, the material was not sealed as far as I trimmed it, so it started peeling apart. I had to hit it with a little super glue to get it to stay put.
So, word of warning there.
So, word of warning there.
03-22-2013, 08:53 PM
#6
Spike
Join Date: Mar 2013
Posts: 12
You need to try an Ozark Ridge Pro II Sweet or Pro II raspy which have a small frame and can be trimmed. Careful on the trimming because she still needs to be able to seal off air flow. If your an experienced caller you need to try the Pro V; it is an incredibly easy call to cut and cackle on. ozarkridgecalls.com Good Luck!
03-27-2013, 12:02 PM
#9
Nontypical Buck
Join Date: Apr 2009
Location: Southern TN
Posts: 1,018
Also, you can bend them a little to make them form to the roof of your mouth a bit. That is what I do. Can't bend them too much, though. They have broken on me, or been bent so much that they wouldn't make good sounds anymore. Bend it just a little, check it out, and then bend a little more if needed.