Community
Turkey Hunting Whether it's spring or fall doesn't matter to this bunch. Great tips on calling, bustin flocks, using blinds and more.

chokes

Thread Tools
 
Old 03-27-2012, 11:38 AM
  #1  
Spike
Thread Starter
 
Join Date: Mar 2012
Location: Georgia
Posts: 82
Default chokes

i was looking at buying a turkey choke for my 12 gauge and i was wondering what the "Constriction (in.)"is. i saw it on the website and then it will say like .665 what does the numbers mean.
junkmonkey17 is offline  
Old 03-27-2012, 06:08 PM
  #2  
Typical Buck
 
Join Date: Sep 2009
Location: Kansas
Posts: 921
Default

That would be thousandths of an inch. The smaller the number, the tighter the choke.

Search around on these forums a bit and you can find what others have had success with. It's best to match the choke with the load you plan to shoot.
Josmund is offline  
Old 03-27-2012, 06:19 PM
  #3  
Giant Nontypical
 
Sheridan's Avatar
 
Join Date: Dec 2007
Location:
Posts: 5,130
Default

Take a look around on here;

http://www.trulockchokes.com/

If you call, ask for George
Sheridan is offline  
Old 03-27-2012, 07:17 PM
  #4  
Spike
Thread Starter
 
Join Date: Mar 2012
Location: Georgia
Posts: 82
Default

thanks so the lower the number the better it will be for turkey hunting because of the tighter patern right.
junkmonkey17 is offline  
Old 03-28-2012, 04:50 AM
  #5  
Nontypical Buck
 
Join Date: Jun 2007
Location: DFW
Posts: 1,195
Default

Originally Posted by junkmonkey17
thanks so the lower the number the better it will be for turkey hunting because of the tighter patern right.
Theoretically, yes. Realistically, maybe not. You can also over-constrict the load and what results is a pattern that is worse. A "blown pattern" if you will. You have to find the sweet spot.
Simp is offline  
Old 03-28-2012, 04:17 PM
  #6  
Nontypical Buck
 
Join Date: Feb 2003
Location: NewLowell ,Ontario ,Canada
Posts: 2,765
Default

No the lower is not the better,

You can also over choke a shell and have deformed shot which will cause flyers and bust the pattern.

I have shot patterns with different choke constrictions for years and have seen what different sizes do. I also have tried out never every choke company out there along with TruLock.

If you plan on shooting lead/Copper turkey loads try out the constrictions between .655-.665

If its heavy shot loads then work with the .665-.670 as if preforms better out of more open constrictions.

The best I have used is Pure Gold Chokes and I won;t even shoot a 12 gauge anymore...
Adrian J Hare is offline  
Old 03-28-2012, 04:31 PM
  #7  
Spike
Thread Starter
 
Join Date: Mar 2012
Location: Georgia
Posts: 82
Default

I was looking at a .665 is that a good size for my 12 gauge with these shells http://www.basspro.com/Remington-Nit...t/69874/120160
junkmonkey17 is offline  
Old 03-28-2012, 04:58 PM
  #8  
Nontypical Buck
 
Join Date: Jun 2007
Location: DFW
Posts: 1,195
Default

Originally Posted by junkmonkey17
I was looking at a .665 is that a good size for my 12 gauge with these shells http://www.basspro.com/Remington-Nit...t/69874/120160
Could be. Each choke/shell combo will be different. Maybe not be night and day, but it will be different. Personally, I shoot hevishot through a .660 choke and the pattern is tight. If I were to shoot lead through it, it might be a terrible pattern. You just can't be sure until you put it to the test.
Simp is offline  
Old 03-28-2012, 05:16 PM
  #9  
Fork Horn
 
Join Date: Oct 2011
Posts: 115
Default

Take a look at the Hevi13 choke tubes. They hold
terrific patterns for me in my Benelli and Remington.
wingseek is offline  
Old 03-29-2012, 11:57 AM
  #10  
Spike
Thread Starter
 
Join Date: Mar 2012
Location: Georgia
Posts: 82
Default

I ordered the choke and it is comming today so should i go get new shells
junkmonkey17 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.