making a paddle call
I' m thinking of buliding my own paddle call and possibly wanting to cut it out of a solid piece for the base. Does any one have either any good advice or point me toward some literature to try this out. Be real rewarding putting a tom in the pto using something you made yourself. thanx:)
|
RE: making a paddle call
Trapper ,
you can go to Turkey Zone online and they have instructions on how to build several types of calls. I actually built a little " slate-box" that was very simple and works wonderfully. |
RE: making a paddle call
I havn' t tried the box calls yet but here is a pretty informative page....
http://www.geocities.com/theboxcallpage/ Also http://www.customsawing.com sales " Neil Cost" poplar blanks for long boxes. They also carry pre-molded paddles in a good many woods and also have hardware for box calls. Neil Cost had a book on the subject but you might be hard pressed to find one and if you do it' s going to be $$$$$, I think it was called Talking Turkey |
RE: making a paddle call
Here are two sites that have message boards on callmaking.You should be able to get some info.
http://www.customcalls.com/ http://www.calltrader.com/ |
All times are GMT -8. The time now is 12:15 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.