![]() |
Turkey Spur Necklace
Do any of you all know how to make a necklace loop with the spurs from a turkey? I saw the idea in a magazine and thought it looked real neat. I figure after I get a few birds I would start working on it.
|
RE: Turkey Spur Necklace
Ive made one from really long pheasant spurs so I would imagine the concept would be the same. What seemed to work for me was to let the legs dry out which seemed to dry out the meat on the inside of the spur. Then I took the smallest drill bit I had, dont know the size but Id say the smaller the better, you dont want too big of a hole. I would drill out a hole clear through the spur about halfway up to try to prevent cracking. After drilling the hole you will have to figure out a way to pry the spur off without damaging it. Using a pair of pliers I was able to kinda loosen up the spur around the base and pop it off with a knife. After I had my collection of spur beads I let them dry out again, then started threading them with fishing line and some beads made from stones I found in the basement. I'll get some pics of what mine with pheasant spurs looked like. Hope this helps. Ask if you have any questions and Ill try to answer them. BR
|
RE: Turkey Spur Necklace
The way I have seen it done is to cut about a 1/2 on each side of the spur and drill a hole through the center of the leg and thread it on. All this is done after it has dried however.
|
RE: Turkey Spur Necklace
First pic
|
RE: Turkey Spur Necklace
2nd pic
|
RE: Turkey Spur Necklace
No drilling required. You just push the marrow out. The leg bone is already hollow. You can do this right away and clean it well. Then let it dry. I bleach the bone part a little and the use clear nail polish to harden and protect.
![]() |
RE: Turkey Spur Necklace
i do mine like OntElk. saw the leg bone above and below the spur. clean out the marrow and skin them(ive seen them with the skin left on though) and dry them and clean them up...works nicely. i got one in my truck hanging from the rear view mirror.
|
RE: Turkey Spur Necklace
Check out the spur collection a friend of mine has. You can also see his necklace in the pic as well.;)
![]() |
RE: Turkey Spur Necklace
holy cow maytom!! your buddy is a turkey slayin machin!! or should i say LONGBEARD slayin machine...thats a heck of a set of hooks!!
correction..i do mine like OntElk except the shell. i cut the brass from the shell i shot the bird with, drill a hole in the primer and put in a eye hook with a closed circle, and then i hot glue the beard into the brass of the shell |
RE: Turkey Spur Necklace
This is so REDNECK!!! I love it. They look good.
|
| All times are GMT -8. The time now is 02:28 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.