HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Traditional Muzzleloading Forum (https://www.huntingnet.com/forum/traditional-muzzleloading-forum-169/)
-   -   I agree, roundballs do work. (https://www.huntingnet.com/forum/traditional-muzzleloading-forum/415406-i-agree-roundballs-do-work.html)

BarnesAddict 08-29-2017 06:34 AM

I agree, roundballs do work.
 
However this is factually a canned/high fence hunt. Michigan has very few hogs running loose and those that are, have escaped from these ranches. Actually the Michigan DNR would love to completely shut these places down and may do so yet.


hunters_life 08-29-2017 07:04 AM

They have worked well for centuries. One just has to be aware of their limitations in range, and with some, their penetration. Once you start getting into the big boy .58's with a bit of hardness in the lead mix you can but the hammer down on just about anything walking this planet. I've put some pretty big hogs and black bear down quite easily with roundball but I switched to Maxi balls a few years back for better accuracy and a bit more range.

Idaholewis 08-31-2017 03:20 AM

Lets pop a few caps off while in the blind you are hunting from and hope it doesn't scare anything off LOL! Since it's a high fenced/canned hunt it doesn't matter, where are they gonna go?

rafsob 01-22-2018 07:12 AM

Always new the PRB was a killer. And our ancestors knew it too!!!

GOOD OLE BOY 01-28-2018 02:50 PM

Yep.Leave the sabot garbage for the inline crowd.

GoexBlackhorn 01-28-2018 03:02 PM

Sabot garbage flies further and more accurately than patched garbage.

I use both. Even having thoughts about about buying a new T/C Impact and converting the barrel to 1:66 twist. But I suspect I'll completely burn-up my patches using my Federal 209A primers.

nchawkeye 01-28-2018 04:16 PM


Originally Posted by GoexBlackhorn (Post 4327197)
Sabot garbage flies further and more accurately than patched garbage.

I use both. Even having thoughts about about buying a new T/C Impact and converting the barrel to 1:66 twist. But I suspect I'll completely burn-up my patches using my Federal 209A primers.

Don't know where you heard that...

Washington had 1 inch diameter rifles made to fire on ships, from all accounts, they were pretty effective...

Just have to match the ball to the purpose... ;)

hunters_life 01-28-2018 04:39 PM

I would assume he heard it from the same place anyone with a little sense heard it. Anything streamlined will fly more accurately and retain more energy, given equal mass of both objects, than a round ball. Basic aerodynamics that most anyone that has a high school diploma should know.

falcon 01-28-2018 05:17 PM

Yep, patched round balls work very well. Snuck up on the big sow and put a round ball in her ear.





Buck with a patched round ball:





Doe with a patched round ball:



hunters_life 01-28-2018 05:39 PM

Falcon, is that a boat trailer crank on that rig? I'm asking because I'm going to build something similar to that rig for when I hunt elsewhere. May swing hinge it to load elk into the truck. I'm a big strong guy but many years of football is catching up to my short 51 years of life. Hauling an elk into the bed of my truck is getting a bit on the rough side. Shoot, slapping a little 160 pound doe up into the bed about made my back scream for mercy.


All times are GMT -8. The time now is 11:05 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.