HuntingNet.com Forums - Shooting the Pedersoli

Page 3 of 3

Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Traditional Muzzleloading Forum (https://www.huntingnet.com/forum/traditional-muzzleloading-forum-169/)

- - Shooting the Pedersoli (https://www.huntingnet.com/forum/traditional-muzzleloading-forum/406371-shooting-pedersoli.html)

ModernPrimitive

05-27-2016 05:40 AM

Quote:

Originally Posted by bronko22000 (Post 4257735)

Hey guys. I opened up the notch from what it was (about .035") to about .050". What a world of difference! I can see a little light on either side of the notch now when the front sight is aligned. I think this should be a major improvement. Next outing will see.

I didn't catch this yesterday.

Need to do the same as front blade,pretty beefy, more than fills the rear notch when sighting.

What size file did you use? Needle?

bronko22000

05-27-2016 09:02 AM

I have a set of small files all different shapes. I used the flat file that measured .050" thick and just carefully went straight down the existing notch.
But if your front sight is thicker you may want to see if you can find a file that is .062" or so.

ModernPrimitive

05-27-2016 12:22 PM

:cool2:

Been on the list for weeks now...thanks for the reminder.
Broke out the needle file set earlier, opened things up a bit; I guess Pedersoli liked to allow for user customization!

All times are GMT -8. The time now is 08:26 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page