HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Traditional Archery (https://www.huntingnet.com/forum/traditional-archery-19/)
-   -   Tiller 3 under ??? (https://www.huntingnet.com/forum/traditional-archery/240111-tiller-3-under.html)

hatchet jack 03-31-2008 04:12 PM

Tiller 3 under ???
 
If your Bow is tillered for 3 under what is a good starting point on your string for your nock?

Hatchet Jack

bigcountry 03-31-2008 04:22 PM

RE: Tiller 3 under ???
 
Well, if your shooting 3 under, I notice 1/2" over center (top of the nock 1/2" notcenter of arrow)is a good starting place, and then when tuning, I usually have to move down 1/16" of an inch. I like to start off bare shaft or paper tuninga little high. When I say 1/2" over center, I am referencing the bottom of the shelf. thats on two martin bows I have that have even tiller at the fades. I heard that bows tillered 3 under will be tillered even if the pivot point is between the throat of your handle and shelf.

hatchet jack 03-31-2008 05:26 PM

RE: Tiller 3 under ???
 
Thanks. I'm thinking my nock point is to high. Thinking about going to the Gold tip trad arrows. I never did bare shaft or paper tune my bow. I been shooting decent out to 15 yards. The arrows seem to be flying good . I want to try and tune the bow better in the next few months. I know I should be able to get more out of this bow. Thanks for your help!!
\

Hatchet Jack

bigcountry 03-31-2008 05:38 PM

RE: Tiller 3 under ???
 
I like bareshafting myself. but if you can put a broadhead on and broadhead plane tune.

hatchet jack 03-31-2008 05:46 PM

RE: Tiller 3 under ???
 
What is Broadhead plane test? Thanks

bigcountry 03-31-2008 06:51 PM

RE: Tiller 3 under ???
 
About the same as bareshaft, just more real life because the feathers are on. If you hit to the left with BH compared to your field tips, stiff spine, increase point wieght, lower BH, etc, and if BH hits low, lower nocking point, etc.Check out OL Adcock's page on it.

http://bowmaker.net/index2.htm


All times are GMT -8. The time now is 01:35 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.