Arthur P

Anybody know where someone can find 11/32 screw-in field points that weight around 220 grains?

Lilhunter

I know its a pain but you could add washers behind the screw in points pretty easy to get that kind of weight. Figure with a 160 screw in, 2 or 3 washers of the right metal should get ya near or above the 220 mark.

Arthur P

Thanks for the idea, Lilhunter. There's a guy on another forum asking for some and, since I don't have any sources, I thought I'd expand the search a little.

Cliff_N_Di

My husband made some a few years for a guy in alaska but they were expensive.

I would do what Dan suggested.

GEREP

Funny you should ask that question. I just bought some 180 grain FT's today. First time I ever saw them and I bought all the shop had. (6) I'm tring to get a certain shaft to fly right (too stiff) and I thought they might help. We'll see...

KPC

LBR

Ace Archery Tackle (www.acearcherytackle.com) has brass points in 125, 145, 160, 175, and 200 grain sizes. Pretty sure they are glue-on only, but with adapters the 175's should work out pretty close (if you are using aluminum).

Chad

Long Bows Rule!

Troy n Oh

simmonssharks.com has screw in points up to 190 not quite 220 but gettin close

SHOOT STRAIGHT >>>--------> Troy

Deleted User

[Deleted by Admins]

Lilhunter

better yet, here is something that is right on to what you want to be able to do.

http://www.lancasterarchery.com/arrow-points.html

PDP already does it. If you cant find it there, let me know I can give you contact numbers to PDP about picking them up.

Arthur P

Lilhunter, that weight module is plumb slick. Kinda like GoldTip's weight system, but PDP's has enough weight to actually DO something. I like it. Thanks for the tip!