LBR, or any other string makers.
 

Well my ultimate goal is to build a glass/ selfbow, but like most people I have no timeor space to do so. So I figured I will take small steps to my goal. And I think the first step is making a flemish string. Were do I start, what do I need, and most importantly how much will it cost to get started.

This is what I know.

I need to make that board thing???? Dont know what it is called. Looks easy and cheep to make.
I need some fast flight, what kind, how much, and do I have to get two colors if I am just dinking around with it.
I need a book/vidio, were can I find one.


Thanks for any help.

RE: LBR, or any other string makers.
 

A string board is nice to have, but not a requirement. Cheap and easy to make, you just need the proper measurements. Make one that goes by string length, not bow length, because there's lots of bows that don't go by AMO specs.

I'd start out with dacron string material. It's cheap, and you will need to practice and willprobably make a few strings that aren't quite right. Two colors is easier, especially starting out. You can also practice making loops with sewing thread (very easy). Stringmaker's wax isn't a requirement, but makes it easier. It holds the strands together while you are working, and makes it a little tacky so you can get a better twist. You will want a good serving tool. You can serve a string by hand, but it takes a while. A cheap one is almost worthless, IMO. Spend a few more bucks and get a good one.

I'll p.m. you with more info.

Chad

RE: LBR, or any other string makers.
 

This may be useful. Check out the links on this page as well. Do a google search and you will find other info too.
http://www2.pcom.net/jthutten/jth/doc/flem_jig.htm

RE: LBR, or any other string makers.
 

You get ahold of Chad's video!

RC

- unabashed thumbs up for the afore mentioned DVD :D