How do you...
04-08-2008 | 01:05 PM
#2
Boone & Crockett
Joined: Sep 2005
Posts: 11,682
Likes: 0
From: Michigan/Ohio
RE: How do you...
1. I make sure she's dead quiet when drawing and shooting
2. I make sure the string and cables are going to be good through the year, if not I replace no later than June
3. I make sure she hits where she aims with a BH I am going to use.
2. I make sure the string and cables are going to be good through the year, if not I replace no later than June
3. I make sure she hits where she aims with a BH I am going to use.
04-08-2008 | 02:40 PM
#5
Nontypical Buck
Joined: Nov 2004
Posts: 3,606
Likes: 0
From: Rhode Island
RE: How do you...
ORIGINAL: Germ
1. I make sure she's dead quiet when drawing and shooting
2. I make sure the string and cables are going to be good through the year, if not I replace in no later than June
3. I make sure she hits where she aims with a BH I am going to use.
1. I make sure she's dead quiet when drawing and shooting
2. I make sure the string and cables are going to be good through the year, if not I replace in no later than June
3. I make sure she hits where she aims with a BH I am going to use.
04-09-2008 | 10:56 AM
#6
Nontypical Buck
Joined: Aug 2005
Posts: 3,102
Likes: 0
RE: How do you...
Asking for a bow tune up will address most things,cam timing,serving wear,condition of the strings and cables,draw length adjustments if you have had string stretch,rest settings,centershot,making sure your arrows are properly spined and flying well out of your setup etc.
Stay away from the box stores find a proshop that the target archers use,get to them away from the august,september,october rush,they will be able to spend more time with you and your bow.
Stay away from the box stores find a proshop that the target archers use,get to them away from the august,september,october rush,they will be able to spend more time with you and your bow.
04-09-2008 | 11:01 AM
#7
Giant Nontypical
Joined: Feb 2003
Posts: 6,453
Likes: 0
From: North Lima Ohio & Clarion Pa
RE: How do you...
Have it checked out (or do it yourself) for proper centershot. As others said make sure everything including string and cables and tubed peeps are in good condition. If you use a plunger button or string loop make sure they are new enough to not cause issues as the season progresses.
Once everything is in fine mecahnical order. Shoot, expirament with broadheads. Find the set-up that puts your mind at total ease.
Once everything is in fine mecahnical order. Shoot, expirament with broadheads. Find the set-up that puts your mind at total ease.
04-09-2008 | 12:47 PM
#8
Nontypical Buck
Joined: May 2006
Posts: 2,849
Likes: 0
From: Southwest Ohio
RE: How do you...
1. Check the string and cable
2. check paper tune
3. shoot and sight in with field points
4. turn over to broadheads about a month out from season to ensure hit same as field points
5. go back to field points to save the target
2. check paper tune
3. shoot and sight in with field points
4. turn over to broadheads about a month out from season to ensure hit same as field points
5. go back to field points to save the target
04-09-2008 | 02:21 PM
#10
Joined: Jul 2007
Posts: 823
Likes: 0
From: Crab Orchard, WV
RE: How do you...
1. PRACTICE LIE TELLING...START SMALL THAN GO BIG
2. BUY SPOT LIGHT, FIND SOMEONE SOBER ENOUGH TO DRIVE ME AROUND
3.CURLS ON THE WORKOUT MACHINE...TO INCREASE THE SPEED IN WHICH I CAN POUND BEERS.
4.PRACTICE SHOOTING TWO ARROWS AT A TIME, I TRY TO GET AS MANY DEER AS POSSIBLE AT ONCE. THAT WAS FOR THE QDM GUYS....
5. AVOID GUYS THAT SPOON!
I THINK THAT COVERS IT
2. BUY SPOT LIGHT, FIND SOMEONE SOBER ENOUGH TO DRIVE ME AROUND
3.CURLS ON THE WORKOUT MACHINE...TO INCREASE THE SPEED IN WHICH I CAN POUND BEERS.
4.PRACTICE SHOOTING TWO ARROWS AT A TIME, I TRY TO GET AS MANY DEER AS POSSIBLE AT ONCE. THAT WAS FOR THE QDM GUYS....
5. AVOID GUYS THAT SPOON!
I THINK THAT COVERS IT