Does any one here know what the markings on Allegiance cams mean?
Mine have an E on the non-module side, EFA 2.5T on the top cam and EFA 2.5B on the bottom cam. Any info is appreciated.

Thanks, Bo

Come on!!! anyone?

Patience grasshopper, our Bowtech gurus will notice your thread.

EFA shows you have the speed mods installed.

The 2.5 refers to your draw length.

The Allegiance has a max draw length of 30 inches. So you must subtract the 2.5 from 30. It shows your mods are for a 27.5 inch draw length on the Allegiance.

The "T" means that mod goes on the top cam and the "B" meansthat modgoes on the bottom cam.

Hope this helps.

Looks like Russ (on the other thread I read) and Scott have ya covered! Shoot me an e-mail any time you want!

The 2.5 marking makes them a 28 1/2" draw.

My mistake.

The 30 inchmod is the number 1 mod on the Allegiance. ( There is a different #1 in relation to max draw length on most of the models).

So in my typo I should have said that you must subtract 1.5 from 30 to show your 28.5 inch draw length.

Once again my bad, I should have paid more attention when I originally posted.

Guess that goes for both of us: I saw your post, and didn't feel the need to look closely at what you wrote. I just trusted you were right and didn't even pay attention to it.

There went me trusting what you write from now on! [8D]

Thanks all...the reason i asked is that my Ally's birth certificate said 29" crossed out and 28.5 written next to it...just wanted to make sure i got what i ordered. I used to shoot 29"...but 28.5 feels perfect. Man i can't begin to tell you, this thing is sweeeeett!!!

thanks again, Bo

Shooter, what should a smooth mod marking be, if EFA is for the speed ones?

thanks, Bo