SA Techie

I use 2 flo green and white c/v for 3D and 2 yellow and white c/v for hunting. Nocks r white.
I wish GT would make some flo pink shafts would certainly make finding em a lil easier.

xibowhunter

2 flo orange and 1 flo green on orange wraps

gibblet

hoyt3

i use to shoot a white dipped arrow with a yellow c feather, and two red. then I went to bright yellow and white. now I am with green a white. I have to agree, anything with white is usually good.

Rick James

I shoot 3x white 4" plastifletches on my Pro 22's. They are easy to see when in the x-ring on a 3D unless your shooting at a Caribou.

hgsnpr

3 white, 5" left wing helical on my legacy 2018s

3 Fl green, 5"left wing helical on my GT 5575s

I like all one color.

BobCo19-65

On the lonbow, I have two red, one gray.
Compound, two white two red.

btomlin

1 flo. green, 2 flo. orange on an orange fade wrap w/ a flo. green nock.

Kanga

The last thing I want to see is the arrow in flight cause if I do then I am not concentrating on my follow through.

For this very reason in practice and 3d I use 2 black 1 dark blue with a black nock.


Now for hunting I use 1 flo yellow 2 flo orange with flo orange nocks so I can find the arrow after the shot.

Gibblet.

Are some of those nocks Magnocks?
If so how do ya like them I have been using Magocks for a few years now and love them.

nubo

I usually like to use 2Green and 1 white. But I've been known to change every now and then depending on the letter's on my shaft. If the colours are green on my shaft I'll use green and white ,if the letter's are red then I'll use 2 red and one white .

nubo