Changing cam on Cybertec
 

I have a 2002 Cybertec with the Versacam 3 on it set at 29" draw 63 lbs. Will changing the cam to the Versacam 2 be more efficient because of the max length on the 2? I know I will probably need to change cables and string but I had planned on doing that right after hunting season. Thanks, Chris

RE: Changing cam on Cybertec
 

Changing to the #2 cam will make the bow more efficient. You would be using more, or in your case, all of the power stroke of the cam. I too shoot a Cybertec, and I ordered mine with the #2 cam for this reason as my draw is 28.5". I get more rotation and more efficiency out of it. You will also have to change out the idler wheel when you do this.

Good luck, hope this helps

RE: Changing cam on Cybertec
 

Thanks for the info. I didn't know I had to change the idler. Again, thanks. Chris

RE: Changing cam on Cybertec
 

Not a problem. Yep, the idler is smaller on the Versacam #2.

Again, good luck.