HuntingNet.com Forums - bowtech limb prob

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Technical (https://www.huntingnet.com/forum/technical-20/)

- - bowtech limb prob (https://www.huntingnet.com/forum/technical/94581-bowtech-limb-prob.html)

fishon01

03-19-2005 07:28 PM

bowtech limb prob

Put on a new set of limbs on a 03 sc pat, and when i put the idler and cam back on it's got slop in it!
They both slide back and forth, any idea's :eek:.............fishon

BowTech_Shooter

03-19-2005 08:41 PM

RE: bowtech limb prob

Quote:

ORIGINAL: fishon01

Put on a new set of limbs on a 03 sc pat, and when i put the idler and cam back on it's got slop in it!
They both slide back and forth, any idea's :eek:.............fishon

My guess would be that either 2004 limbs were accidently ordered or accidently shipped as the limb fork cut outs are a bit wider on them versus a 2003 or prior model. I would contact the dealer you purchased them from ASAP and let them know what happened.

fishon01

03-19-2005 09:12 PM

RE: bowtech limb prob

thanks for the reply bt shooter !

I ordered them straight from bt pro shop, and you are correct there is a wider cut out. So that means they sent the wrong one's[:'(]

DaveC

03-20-2005 04:43 AM

RE: bowtech limb prob

Ouch!!

KBacon

03-20-2005 07:34 AM

RE: bowtech limb prob

fishon01... now just order the '04 cam and idler that contain the bearings and the correct spacers... :D

fishon01

03-20-2005 09:27 AM

RE: bowtech limb prob

kbacon....It's funny you mention that , cause i asked if they would fit my o3 limbs. Which they would'nt of course.
So maybe thats the way to go if the price is'nt over board;)

DaveC

03-20-2005 02:32 PM

RE: bowtech limb prob

Or maybe they will send you a set of 03 cams[8D]!

All times are GMT -8. The time now is 09:14 AM.