drop aways and bowtechs
 

I have heard that because of the limb design and the small amount of cable slide travel that drop aways that hook to the cable slide can be a problem to tune on certain bowtechs.Is this the case?



CB

RE: drop aways and bowtechs
 

No, at least not with the binary cams. I know several people including myself using a drop-away with no problem assuming it is set up properly.

RE: drop aways and bowtechs
 

The Equalizer camed bows do have a bit more cable slide travel than their single cam cousins so when attaching the drop away cord to the slide there should be ample room for adjustment.

RE: drop aways and bowtechs
 

Maybe I should be more specific.I was reffering to the patriot with the infinity cam.

CB

RE: drop aways and bowtechs
 

I have seen just about every dropaway imaginable mounted on the Patriot;)

RE: drop aways and bowtechs
 

I've put TTs, NAPs, and HHA drop aways on Patriots, Libertys, Mighty Mites, just about all the BowTechs using the slide to raise them. They've all worked fine.

RE: drop aways and bowtechs
 

For what it's worth, I've got a Drop Zone on a Patriot and it works great as far as I'm concerned.

RE: drop aways and bowtechs
 

I use the HHA DART drop away. And the proshop has put drop aways on numerous Bowtech of all cam designs.

RE: drop aways and bowtechs
 

I have a patriot 2003 with infinity cam and I use a QAD drop away quality archery designs rest this is a awsome rest little pricy though but worth the money.I have it hooked right to the little hole in my cable guard.heres there site www.qadinc.com brad bowtech patriot

RE: drop aways and bowtechs
 

I'm using the drop zone on my Patriot and had zero contact issues after a recent limb swap once I had the proper rockers in place (BTW, for those keeping score, it now pulls 70# maxed:D- finally).
No fletching contact for me.