HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   Old Glory center shot (https://www.huntingnet.com/forum/technical/91515-old-glory-center-shot.html)

sjb3 02-22-2005 04:42 PM

Old Glory center shot
 
Just wondered what the center shot measurement was on your Old Glory? Thanks sjb3

PA Hardwoods 02-22-2005 05:40 PM

RE: Old Glory center shot
 
1 7/8" on the dot. That is from the inside of the rest mounting bracket to the center of the launcher.

ampahunter 02-22-2005 08:08 PM

RE: Old Glory center shot
 
From the 'inside if the riser', (left side of the riser, if it's a right handed bow) it is 1-1/16" to center shot.

ijimmy 02-23-2005 05:57 AM

RE: Old Glory center shot
 
Around 7/8s to 15/16s for me

jmac_or 02-23-2005 08:30 AM

RE: Old Glory center shot
 
1 7/8" from the inside of the rest, at least on mine. Dead on there.
JMAC

muzzyman88 02-23-2005 09:43 AM

RE: Old Glory center shot
 
I'm shooting an Allegiance and it came in at roughly 1 7/8 from the inside of the rest mounting bar. I think thats the best place to start on these bows to get you real close.

Matt / PA 02-23-2005 11:09 AM

RE: Old Glory center shot
 
Remember all of these risers carry their own unique geometry....don't just apply what works for one to every model.

The Allegiance and Old Glory are 2 different animals.....
My Centershot, and the measurement that is giving me perfect bullet holes is just a hair over 15/16" off the near side on my Old Glory.


All times are GMT -8. The time now is 01:01 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.