What serving?
 

What serving do you guys use for general purpose stuff like tying in peeps, and use as a center serving?

Also, does anyone know if you can replace the metal cable on the NAP dropaways to a rope like the TT's and if so, what would be the best material to use?


Thanks

RE: What serving?
 

I use braided fastflight. Very durable and should it start to let go you can apply a touch of Fletchtite until you are able to replace it.

RE: What serving?
 

I use braided fastflight for center serving. Different diameters for sifferent strings. I don't serve my peeps in. Never had to----oh maybe because I don't have a rubber tube pulling on it. Never had a rubber tube either. Or a kisser button. Oh, I did start tying on a nockset and scrapped the brass ones.

RE: What serving?
 

For center servings I use either the .019" or .024" (depends on the amount of strands of the string and type of arrow nocks) BCY Halo Braid.
For peeps I use the BCY nock point tying thread .020".

You can also use loop rope to replace the cable on the drop away--it'll work!!!

RE: What serving?
 

BCY #62 .021" is what I use.............

RE: What serving?
 

Sure will. You may have to drill out the hole but it will work and work better. imo. This is how I set mine up. loop rope to downward cable. 3 does paid the price with this setup. Now I'm on to the DZ. NO problems with the QT 2000 w/ mods.:D

RE: What serving?
 

the size serving that I use varies according to the thickness of the string and the type of nock tht I'm using. I have noticed that a lot of people have too heavy of a serving on their string. The arrow nock should be loose enough that a sudden jolt on the string should knock it loose, or close to it. I have seen many nocks that are way too tight when attached to the string.

RE: What serving?
 

Both Brownell and BCY provide recommendations for their string and serving products.

You can get the information on their websites:

http://www.bcyfibers.com/

http://www.brownellco.com/pages/archeryMAIN.html