HuntingNet.com Forums
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   Back Tension (https://www.huntingnet.com/forum/technical/90341-back-tension.html)

JoshKeller 02-16-2005 10:48 PM
RE: Back Tension
 
Is that 30" draw measured, or what is written on the bow? It may actually be much longer than 30" if you didn't measure the actual draw length.
I think its pretty close to being 30" I'm shooting 29.5" arrows and the insert is only about 1/8" past the drop away rest prong.

Straightarrow 02-17-2005 04:28 AM
RE: Back Tension
 
That sounds like it will work out to be past 30". The prongs don't usually go much past the berger button hole. Add 1 3/4" to deepest portion of the grip to get actual draw length. I'll bet you're near 31". Taking an inch off your draw length will make a big difference.


All times are GMT -8. The time now is 10:47 AM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.