I am going to be geting the BOWTECH ALLEGANCE, but I have a ? on what draw length
 

Right now I am shooting a Mathews Legacy with a 27 inch draw length plus a string loop. And I shoot this bow very well, but I think ANYTHING OVER 27 is going to be to long for me with the string loop added to it. So what draw length should I get for the Allegance because I want to have it set for the 80% let off. Having it set up for the 80% let off adds a little to your draw length from what I understand. Any help would be great.
Thanks

RE: I am going to be geting the BOWTECH ALLEGANCE, but I have a ? on what draw length
 

Get your draw lenght measured and order that lenght.

My Allegiance came in exactly 28" and fits perfectly;)

RE: I am going to be geting the BOWTECH ALLEGANCE, but I have a ? on what draw length
 

I keep the same draw length from Bowtech to Mathews. I owned a BKII, an Outback and now an Allegience. All the same draw length, even with the swith in let-off. Seemed to work perfectly.

Kelly

RE: I am going to be geting the BOWTECH ALLEGANCE, but I have a ? on what draw length
 

The Equalizer cam bows I've measured have been dead on. Well, one was 1/16" short (maybe I made a small error in measurement). :) Get your draw length measured properly. You should then be ok to order what you need.

RE: I am going to be geting the BOWTECH ALLEGANCE, but I have a ? on what draw length
 

From your above description you want to go with the 27" draw length on the Allegiance. The bows come at 80% letoff at the specified draw length. If you want to change it to 65" then you would lose approx. 1/4" on the DL.

RE: I am going to be geting the BOWTECH ALLEGANCE, but I have a ? on what draw length
 

Thanks for the Info guys ! You answered my question.:)