How do you remove a nock from your string?
10-27-2004 | 08:59 PM
#2
Nontypical Buck
Joined: Feb 2003
Posts: 1,161
Likes: 0
From: In Teh Garage (Rossville, GA USA)
RE: How do you remove a nock from your string?
with Nock ring pliers
If you dont have any you can use a small screwdriver and place the head in the split of the nock ring and turn to open the nock ring wide enough to slip it off.
be very careful not to damage your string or serving.
the best thing to do would be to go to youre local archery shop and spend the 7 dollars to buy a good pair of nock ring pliers and while you are there get a spool of number 2 serving thread and tie youre nocking points on instead of using brass nocking rings.
If you dont have any you can use a small screwdriver and place the head in the split of the nock ring and turn to open the nock ring wide enough to slip it off.
be very careful not to damage your string or serving.
the best thing to do would be to go to youre local archery shop and spend the 7 dollars to buy a good pair of nock ring pliers and while you are there get a spool of number 2 serving thread and tie youre nocking points on instead of using brass nocking rings.
10-28-2004 | 12:54 PM
#3
Dominant Buck
Joined: Feb 2003
Posts: 26,274
Likes: 0
From: land of the Lilliputians, In the state of insanity
RE: How do you remove a nock from your string?
Get a cheap pair of knock ring plier. Use the funny looking part. It will split and separate it to the point you can take it off.
Thread
Thread Starter
Forum
Replies
Last Post
calebwill
Bowhunting
5
06-11-2007 03:40 PM
