how to adjust timing on my bow...
 

I rescently had my string replaced and just this weekend, I noticed that there are alignment marks on my cam(single), and it's off. Maybe mt string has stretched a little. How do I adjust it? I was thinking I could take off one end of the string (in a bow press), and add a few more twists. Anyway thanks for the help...

RE: how to adjust timing on my bow...
 

First off, make sure the limbs are pressed all the way to the bottom to get your staging(timing on a single cam bow)right. Check to see if its still off. If it is, take the string off and make sure that its twisted back to the correct length. Go back and check the staging again, then begin to twist the cable a little at a time untill u get the bow back to where it should be.

RE: how to adjust timing on my bow...
 

you need to check the axle to axle first if youre a to a is too short you will need to eleminate some of the twists in the harness then you can work on the string to get it to the proper length. just make sure the cam is not under or over rotated with the bow let down.
Clear as mud?[8D]