Broadheads and Vanes
 

Hopefully this is an easy one.

I just went and bought some Muzzy 100 3 blades....

I am shooting Easton Axis 400's. I installed all the broadheads, and wouldn't you know it, none of them line up with the vanes...

Is it a neccesity that the be perfectly lined up?

I am shooting a Hoyt ViperTec which is tuned pretty darn good, Shooting a bullet hole through paper.... Any opinions or suggestions would be great...

Thanks!

-Jared

RE: Broadheads and Vanes
 

I have heard two different things when it comes to this. Some people say that you should have at least one blade line up with your cock vane. Others say that as long as your arrow is true(spin tested) and bow is tuned. It does not matter at all. Currently, my broadheads are just stuck on my arrows and they fly great. I shoot them up to about 40yds with no problem. Good Luck

RE: Broadheads and Vanes
 

It doesn't matter how the blades line up as long as they spin true. With offset or helical vanes,feathers, the blades aren't cutting the same air as the feathers are anyway so why should it matter.

RE: Broadheads and Vanes
 

No it's not. Read through this link it may answer your question better and maybe some others you may have.
http://www.broadheadtests.com/FAQ.html

RE: Broadheads and Vanes
 

Thanks for the help guys...

Thanks alot 5-shot, thats a great link!

-Jared