measured draw weight
 

I have a Cybertec that is rated for 60-70lbs and had never had it checked.When I bought it the cams were for a longer draw than what I have so I bought the correct cam that would put me into the mid range on the cams.Anyway, I had it checked for poundage and it only tipped the scale at 65#.I have it set maxed out with the draw @ 28" .Its not a really big deal but it has me curious as to why the max draw is so low.Thanks, Ron:)

RE: measured draw weight
 

The cables have streached or they are just too long which would decrease the poundage.
Put about five or six twists in each cable and the poundage should come back.