HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   Paper tuning set - up (https://www.huntingnet.com/forum/technical/68184-paper-tuning-set-up.html)

bakerwonderhound 08-05-2004 07:28 AM

Paper tuning set - up
 
What are your opinions on how far the paper should be in front of the bow for paper tuning. Also, generally, what does a left, right, up or down tear mean? Basically, how do I paper tune and what do the tears mean. Thanks

bigcountry 08-05-2004 08:01 AM

RE: Paper tuning set - up
 
Go do a search for Easton Archery. They got a wonderful tuning guide that is free. It explains all the tears. I paper tune at 5, 10 and 15 yards. I use wrapping paper on a wooden frame stapled. If you find youself adjusting say centershot to the edges, it could be you torqueing, or your vanes are not clearing you rest or bow.

legacy22 08-05-2004 08:49 AM

RE: Paper tuning set - up
 
Agreed bigcountry. My buddies and I use that as your guide when tuning in. It helps a ton. And since we arent the brightest bulbs on the tree, we use it a lot because there is so much to remember.

dwaasp 08-05-2004 11:45 AM

RE: Paper tuning set - up
 

What are your opinions on how far the paper should be in front of the bow for paper tuning. Also, generally, what does a left, right, up or down tear mean? Basically, how do I paper tune and what do the tears mean. Thanks
A tear shows you where each end of the arrow went through the paper.
To move the nock down would move the fletching end of the arrow down etc.

If one has the correct arrows, for the most part one can tune the bow by setting the nocking point and or arrow rest to adjust how the arrow flies (tears the paper).

Before paper tuning, you have bought arrows to fit the arrow manufacture’s chart showing things as weight, draw length, hard cams, finger shooters & etc..

You will make sure you have no fletching contact with the arrow rest or sight window. The distance you will be from the paper to start is 1-2 yds, but you will back up, as tear improves. The most erratic arrow movement will be between 6-10 yds.

You would want the initial set-up; tiller, rest & nocking point set to what the manual, pro shop, or bow company suggest.

Tune the nocking point first (the vertical aspect of the tear) then the arrow rest. If one would need to move these points far from the suggested, there may be other problems. These problems & response you will find in many posts & publications.

Derbytown 08-08-2004 12:19 PM

RE: Paper tuning set - up
 
Download the "Easton Tuning Guide" for the answers to these questions, and many, many more.

http://www.eastonarchery.com/downloads/

Hope this helps. Be safe.
Shoot Straight
Derbytown :D


All times are GMT -8. The time now is 02:47 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.