What brohead do you use?
07-09-2004, 12:43 PM
#32
Nontypical Buck
Join Date: Feb 2003
Location:
Posts: 2,994
RE: What brohead do you use?
What gr. should I use with a 50-55 lb 25 in draw?
For what it's worth, you may find your best bet at consistent penetration with a cut to tip head such as the Magnus Stingers.
07-09-2004, 01:11 PM
#33
Join Date: Jul 2003
Location: baltimore,md
Posts: 547
RE: What brohead do you use?
I prefer the NAP products-Shockwaves,Spitfires(Pros),and this year the Spitfire XP's.As you can see,I like mechs,they have never given me a reason not to.BUT,If I were to go with a fixed blade,the NAP Crossfire,Muzzy 100gr.3-blade,or the Montec G5--------By the way,Whats a brohead?...Bob
07-12-2004, 06:12 AM
#39
Nontypical Buck
Join Date: Feb 2003
Location: East Central ILLinois USA
Posts: 1,595
RE: What brohead do you use?
Deer-Slayer22;
With my 26 inch draw and weight at 55-60, I use 3555 Gold Tips XT with the 100grain 4 Blade Muzzy's.
I used the same arrow and broadhead grain weight when I shot 48 lbs with the 26 inch draw and was getting complete passthroughs.
I tried shooting the 75 grain mechanicals with the 48lb setup also but got better results with 100grain Cut on impact heads.
Check your arrow charts to make sure you are using the correct spine arrow for your specs, and like the guys say what length are your arrows cut at? What is your FOC?
All the pieces of the puzzle must be addressed to find the optimum setup.
With my 26 inch draw and weight at 55-60, I use 3555 Gold Tips XT with the 100grain 4 Blade Muzzy's.
I used the same arrow and broadhead grain weight when I shot 48 lbs with the 26 inch draw and was getting complete passthroughs.
I tried shooting the 75 grain mechanicals with the 48lb setup also but got better results with 100grain Cut on impact heads.
Check your arrow charts to make sure you are using the correct spine arrow for your specs, and like the guys say what length are your arrows cut at? What is your FOC?
All the pieces of the puzzle must be addressed to find the optimum setup.
