HuntingNet.com Forums - 3D arrow suggestions

Page 2 of 2

Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Technical (https://www.huntingnet.com/forum/technical-20/)

- - 3D arrow suggestions (https://www.huntingnet.com/forum/technical/59564-3d-arrow-suggestions.html)

bbahunter

04-23-2004 02:52 AM

RE: 3D arrow suggestions

MM88,
Check into an easton redline 410, with a 75 grain point, they are about 40 grains lighter than the axis. ( bare shaft weight )
Also they come with unibushings, and should be close to the same diameter ,as the axis.

PABowhntr

04-23-2004 05:33 AM

RE: 3D arrow suggestions

Quote:

I do shoot CXL's as Frank mentioned and I can say with 100% that they SUCK to pull out as well.

I stand corrected somewhat. However, I am also using slightly larger points on my Axis and have not found them to be excessively difficult to remove from the Mckenzie targets. I just attributed this to somewhat of a lack of excessive KE considering I am not shooting my normal 31 inch draw and the cam style is less aggressive than what I am accustomed to. Guess that little lip on the point is helping out considerably.

ijimmy

04-23-2004 05:39 AM

RE: 3D arrow suggestions

Quote:

BGfisher ; I've had guys tell me they'd pull mine all day long.

What;););):)

Arthur P

04-23-2004 10:57 AM

RE: 3D arrow suggestions

Do what I do. Always make sure you've got a pencil in your quiver. That way, you're automatically the scorekeeper. Scorekeepers don't pull arrows. ;)

ChiefHeadhunter

04-23-2004 03:04 PM

RE: 3D arrow suggestions

My CXL's pull easily with the armorall.

Arthur is correct. I take a pencil and a 3rd hand brand clipboard and keep score and that works well for me.

-Chief

All times are GMT -8. The time now is 07:13 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page