HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   parallax measurement. help please ANYONE????? (https://www.huntingnet.com/forum/technical/59144-parallax-measurement-help-please-anyone.html)

buckeye 04-17-2004 01:21 PM

parallax measurement. help please ANYONE?????
 
When measuring the parallax, I measure from the bottom of the arrow to where at on the sight? Thanks

Arthur P 04-17-2004 02:39 PM

RE: parallax measurement. help please
 
You have someone else measure your parallax. I don't know if it's correct but I measure from the middle of the arrow. But whether from the center or bottom of the arrow, it's measured from there to the center of the peep while you're at full draw.

buckeye 04-17-2004 02:48 PM

RE: parallax measurement. help please
 
I thought parallax was the horizontal measurment from your arrow to your sight???? I am just not sure where the measurement goes to on the sight.

I thought you measured from your sight pin to the peep at full draw for the sight base measurement??

Am I confusing the 2?

Arthur P 04-17-2004 03:47 PM

RE: parallax measurement. help please
 
Parallax is the distance from your eye to the arrow at full draw. I guess you could also call the distance from the sight pin to the peep another form of parallax. How far the pin is from the arrow is just a sight setting, as far as I know. I've never heard it called parallax.

buckeye 04-17-2004 03:52 PM

RE: parallax measurement. help please
 
I am trying to make a sight tape for an adjustable impact cosmic sight over on jacksons archery. Looks much prettier than my scribbles:D

Where else can I make one of these?

Thanks.


All times are GMT -8. The time now is 10:11 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.