|
Question about Bowtech draw modules.
According to the owners manual on the Patriot single, I can get a module #.5 and get 65% letoff at 30". If I'm at 80% @ 30" with a # module, would I also gain a 1/2" of draw length by going with the .5 module or does it only change the letoff? The reason I ask is that I normally shoot a 31" draw length and I'm having to shoot a really long loop to get my anchor point where I want it. If I could gain just a 1/2" of draw length I would be just a little more happy.
|
RE: Question about Bowtech draw modules.
I only see the chart going down to Module #1 for a 30" draw length in the owners manual. Not sure you can get a 0.5.
Fritz |
RE: Question about Bowtech draw modules.
Look on page 14 at the 65% post settings chart. It shows a .5 module for the Infinity cam.
|
RE: Question about Bowtech draw modules.
Guess you're right - wonder why they didn't put that on page 13's module chart. I'm obviously no expert, but I just put an N2.5 on my Patriot in order to shorten a 29" draw length to 28.5" . My guess is that you'll gain that half inch you want from that cam.
Fritz |
RE: Question about Bowtech draw modules.
ORIGINAL: Mike from Texas According to the owners manual on the Patriot single, I can get a module #.5 and get 65% letoff at 30". If I'm at 80% @ 30" with a # module, would I also gain a 1/2" of draw length by going with the .5 module or does it only change the letoff? The reason I ask is that I normally shoot a 31" draw length and I'm having to shoot a really long loop to get my anchor point where I want it. If I could gain just a 1/2" of draw length I would be just a little more happy. I think I'm reading this right... I don't believe the 0.5's are cut yet (since I didn't get any in my stock) but when they are ready, I'm not positive but you may be able to squeak 30.5" draw at 80% let off, you'll just have to play with the draw stop a little to find the sweet spot.;):D |
RE: Question about Bowtech draw modules.
C'mon Pat, don't tease me. Can you find out for sure?
|
RE: Question about Bowtech draw modules.
ORIGINAL: Mike from Texas C'mon Pat, don't tease me. Can you find out for sure? Maybe Monday, The plant's closed on the weekend.:D |
RE: Question about Bowtech draw modules.
Thanks!.... Is it Monday yet? :D
|
| All times are GMT -8. The time now is 08:38 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.