HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   Question for Pro40 freedom cam shooters (https://www.huntingnet.com/forum/technical/55266-question-pro40-freedom-cam-shooters.html)

HotLZ 03-07-2004 08:54 PM

Question for Pro40 freedom cam shooters
 
How is the cable clearance for the vanes on the pro40 freedom cam? Is it like the liberty in that there is very little clearance? Just wondering as I am considering picking one up but didn't know if you can shoot full length feathers with it. I would prefer to shoot cock feather up, but out will work too if I have to for more clearance.

Rod

Rack-attack 03-08-2004 09:38 AM

RE: Question for Pro40 freedom cam shooters
 
Its close - but I seem to have clearance with Cock down

pdq 5oh 03-08-2004 12:27 PM

RE: Question for Pro40 freedom cam shooters
 
There's more clearance than the Liberty. I shoot cack vane down, too.

HotLZ 03-08-2004 03:44 PM

RE: Question for Pro40 freedom cam shooters
 
Thanks guys. What's your opinion on how this bow shoots as compared to the liberty, i.e. noise levels, hand shock/vibration, jump, all that good stuff.

Buck Magnet 03-08-2004 03:54 PM

RE: Question for Pro40 freedom cam shooters
 
HotLZ,

I fixed the clearance problem on my Liberty by taking the factory cable slide off and putting on a Simms Virgin Teflon Cable slide. I know have plenty of clearance shooting cock vane down with 4" duravanes. I can actually put my cock vane straight in towards the cables and it will clear! I hope this helps a bit if you get the Pro40 and want a little more clearance!


All times are GMT -8. The time now is 02:38 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.