? about spot hogg
 

Kinda feel dumb asking this but I was wondering if there was a way to adust the pins individually up and down on the spot hogg real deal? Thanks in advance for any answers.

RE: ? about spot hogg
 

yes

RE: ? about spot hogg
 

Yep Hawgz is right;)

RE: ? about spot hogg
 

Elk--just to elaborate, 'each' pin has two hex screws for adjustment. It's a see-saw adjustment, the top screw angles the pin down and the bottom screw angles the pin up--and so on.
Also the adjustment for the 2nd & 3rd axis works with the same principle.
Very easy to 'fine-tune'.

RE: ? about spot hogg
 

Elkfreak, also, after the pins are adjusted. The wire in the center is used to align your pins. This adjustment is made with the silver screw on the back of the pin. This will move the pin in or out so that you will be perfectly aligned for all of your yardages. Make sure that you don't go out too far as the wire will bend and give you a curvature of the wire. Making your pins have a curving effect. Good luck.